Kingston ValueRAM-4GB 1333MHz DDR3-Non-ECC CL9 Notebook-Memory (KVR13S9S8/4)

Kingston ValueRAM-4GB 1333MHz DDR3-Non-ECC CL9 Notebook-Memory (KVR13S9S8/4)
Kingston ValueRAM-4GB 1333MHz DDR3-Non-ECC CL9 Notebook-Memory (KVR13S9S8/4) Kingston ValueRAM-4GB 1333MHz DDR3-Non-ECC CL9 Notebook-Memory (KVR13S9S8/4) Kingston ValueRAM-4GB 1333MHz DDR3-Non-ECC CL9 Notebook-Memory (KVR13S9S8/4) Kingston ValueRAM-4GB 1333MHz DDR3-Non-ECC CL9 Notebook-Memory (KVR13S9S8/4)
Brand: Kingston
  • 4 GB 1333 MHz DDR3 Non-ECC CL9 SODIMM single rank, 204-pin, 1.5 V
  • All ValueRAM memory is 100% tested
  • ValueRAM is ideal for system builders and those who buy memory by specification
  • Important: Please always check the compatibility with manufacturer before purchasing this DRAM module
Product Code: KVR13S9S8/4
Size (length*width*height): 9cm x 5cm x 1cm
Availability: In Stock
Price: RM140.00
Qty:  

KVR13S9S8/4

4GB 1Rx8 512M x 64-Bit PC3-10600

CL9 204-Pin SODIMM

FEATURES

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.5V (1.425V ~ 1.575V)

• 667MHz fCK for 1333Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 9, 8, 7, 6

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset

• PCB: Height 1.18” (30mm), double sided componen



1 x Kingston 4GB DDR3 1333Mhz SODIMM Value Ram - KVR13S9S8/4

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: